manualshive.com logo in svg

GE N60, Instruction Manual

Introducing the Lenovo N60 - a sleek and powerful device designed to enhance your everyday computing experience. Get started quickly with our comprehensive Quick Start Manual, available for free download at manualshive.com. Access the manual effortlessly and uncover the full potential of your Lenovo N60.

Share
Download
background image

5-132

N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL

PRODUCT SETUP

CHAPTER 5: SETTINGS

5

This menu is used to enter user-defined text and user-selected Modbus-registered data fields into the particular user 
display. Each user display consists of two 20-character lines (top and bottom). The tilde (~) character is used to mark the 
start of a data field – the length of the data field needs to be accounted for. Up to five separate data fields can be entered 
in a user display – the 

n

th tilde (~) refers to the 

n

th item.

A user display can be entered from the front panel keypad or the EnerVista interface (preferred for convenience). The 
following procedure shows how to enter text characters in the top and bottom lines from the front panel keypad:
1.

Select the line to be edited.

2.

Press the decimal key to enter text edit mode.

3.

Use either 

VALUE

 key to scroll through the characters. A space is selected like a character.

4.

Press the decimal key to advance the cursor to the next position.

5.

Repeat step 3 and continue entering characters until the desired text is displayed.

6.

The 

HELP

 key can be pressed at any time for context sensitive help information.

7.

Press the 

ENTER

 key to store the new settings.

To enter a numerical value for any of the five items (the 

decimal form

 of the selected Modbus address) from the front panel 

keypad, use the number keypad. Use the value of “0” for any items not being used. Use the 

HELP

 key at any selected 

system display (setting, actual value, or command) which has a Modbus address, to view the 

hexadecimal form

 of the 

Modbus address, then manually convert it to decimal form before entering it (EnerVista usage conveniently facilitates this 
conversion).
Use the 

MENU

 key to go to the user displays menu to view the user-defined content. The current user displays show in 

sequence, changing every four seconds. While viewing a user display, press the 

ENTER

 key and then select the ‘Yes” option 

to remove the display from the user display list. Use the 

MENU

 key again to exit the user displays menu.

An example of user display setup and result is shown as follows.

If the parameters for the top line and the bottom line items have the same units, then the unit is displayed on the bottom 
line only. The units are only displayed on both lines if the units specified both the top and bottom line items are different.

  USER DISPLAY 1

 

DISP 1 TOP LINE:

Current X  ~  A

Shows user-defined text with first tilde marker

DISP 1 BOTTOM LINE:

Current Y  ~  A

Shows user-defined text with second tilde marker

DISP 1 ITEM 1:

6016

Shows decimal form of user-selected Modbus register 

address, corresponding to first tilde marker

DISP 1 ITEM 2:

6357

Shows decimal form of user-selected Modbus register 

address, corresponding to second tilde marker

DISP 1 ITEM 3:

0

This item is not being used. There is no corresponding 

tilde marker in top or bottom lines.

DISP 1 ITEM 4:

0

This item is not being used. There is no corresponding 

tilde marker in top or bottom lines.

DISP 1 ITEM 5:

0

This item is not being used. There is no corresponding 

tilde marker in top or bottom lines.

 USER DISPLAYS

Current X  0.850

Current Y  0.327 A

Shows the resultant display content

Summary of Contents for N60



























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for N60

Gantner E Series Communications Manual preview
E Series
Brand: Gantner Pages: 56
ABB HF Series Manual preview
HF Series
Brand: ABB Pages: 63
Dahua NKB User Manual preview
NKB
Brand: Dahua Pages: 58
GCE S 400 Operating Instructions Manual preview
S 400
Brand: GCE Pages: 24
Hama Thunder V18 Instruction Manual preview
Thunder V18
Brand: Hama Pages: 12
Hama Thunder V18 Operating Instruction preview
Thunder V18
Brand: Hama Pages: 12
Hama Mini V3 Rumble Operating Instruction preview
Mini V3 Rumble
Brand: Hama Pages: 14
Hama Dual Vibration Operating Instruction preview
Dual Vibration
Brand: Hama Pages: 8
Madas M16/RMO NA/NC Installation Instructions Manual preview
M16/RMO NA/NC
Brand: Madas Pages: 6
Madas EVP/NC Manual preview
EVP/NC
Brand: Madas Pages: 11
R82 Cricket User Guidance preview
Cricket
Brand: R82 Pages: 89
National Instruments NI 9514 User Manual preview
NI 9514
Brand: National Instruments Pages: 72
National Instruments NI 9514 Operating Instructions And Specifications preview
NI 9514
Brand: National Instruments Pages: 41
NAPCO MAGNUM ALERT 3000 FIRE ALARM Basic Operating Instructions preview
MAGNUM ALERT 3000 FIRE ALARM
Brand: NAPCO Pages: 2
bihl+Wiedemann BW3489 Installation Instructions Manual preview
BW3489
Brand: bihl+Wiedemann Pages: 16
Trane Tracer CH.530 RLC-SVU01B-E4 Owner'S Manual preview
Tracer CH.530 RLC-SVU01B-E4
Brand: Trane Pages: 60
GiBiDi GECO LUX GECO60 Instructions For Installations preview
GECO LUX GECO60
Brand: GiBiDi Pages: 48
Heat & Cool HCUMR-903 Operation Manual preview
HCUMR-903
Brand: Heat & Cool Pages: 5

Brands by name

Popular brands

Load more brands