manualshive.com logo in svg

GE N60, Instruction Manual

Introducing the Lenovo N60 - a sleek and powerful device designed to enhance your everyday computing experience. Get started quickly with our comprehensive Quick Start Manual, available for free download at manualshive.com. Access the manual effortlessly and uncover the full potential of your Lenovo N60.

Share
Download
background image

5-72

N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL

PRODUCT SETUP

CHAPTER 5: SETTINGS

5

RxGOOSE1 ETYPE APPID

Range: 0 to 65535 in steps of 1
Default: 0

If the value entered is non-zero, the APPID field of incoming GOOSE messages must exactly match this value for the 
message to be accepted as a valid RxGOOSE1 message. If the value entered is zero, RxGOOSE1 does not check the value 
received in the APPID field.
If the publisher is a UR series 7.3x device, the setting needs to match the value of the publisher’s 

TxGOOSE ETYPE APPID

 

setting.

RxGOOSE1 GoCBRef

Range: 0 to 129 alphanumeric, underscore, slash and period characters, beginning with an alpha character
Default: empty string

The gocbRef field of incoming GOOSE messages must match this value for the message to be accepted as a valid 
RxGOOSE1 message. If the entered value is the empty string, RxGOOSE1 is disabled. If not the empty string, the entry 
needs to be an ACSI ObjectReference to the publishing control block in the format:
<LDName>/LLN0.<GoCBName>
where <LDName> is the function-related name if the logical device containing the publishing control block has "ldName" 
configured, otherwise the product-related name of that logical device, and <GoCBName> is the name of the publishing 
control block.
The N60 translates the ACSI format required for this setting to the MMS format used in GOOSE messages:
<LDName>/LLN0$GO$<GoCBName>
If the publisher is a UR 7.3x or 7.40 series device, <LDName> is the value of the publisher's Master functional ldName 
setting if that setting is not empty, otherwise it is the value of the publisher's IED NAME suffixed with "Master". If the 
publisher is a UR 7.3x series device, <GoCBName> is "GoCB" suffixed with the two digit TxGOOSE instance number, for 
example "GoCB01". If the publisher is a UR 7.40 series device, <GoCBName> is as specified earlier in the TxGOOSE 
section of this chapter.

RxGOOSE1 datSet

Range: 0 to 32 alphanumeric and underscore characters, beginning with an alpha character
Default: empty string

If the entered value has one or more characters, the datSet field of incoming GOOSE messages must exactly match this 
value prefixed by <LDName>/LLN0$ for the message to be accepted as a valid RxGOOSE1 message. <LDName> is as 
specified in the RxGOOSE GoCBRef setting above. If the entered value is the empty string, RxGOOSE1 does not check the 
value received in the datSet field.
If the publisher is a UR 7.3x series device, set this setting to the value of the publisher's DataSetxx name setting, where xx 
is the instance number of the data set selected by the publisher's 

TxGOOSE datSet

 setting. If the publisher is a UR 7.40 

series device, datSet is as specified in the DataSets section of this chapter.

RxGOOSE1 ConfRev

Range: 0 to 4294967295 in steps of 1
Default: 1

If the value entered is non-zero, the confRev field of incoming GOOSE messages must exactly match this value for the 
message to be accepted as a valid RxGOOSE1 message. If the entered value is zero, RxGOOSE1 does not check the value 
received in the confRev field.
If the publisher is a UR 7.3x series device, set this setting to match the value of the publisher's 

TxGOOSE ConfRev

 setting.

R-RxGOOSE1 RECEPTION MODE

Range: SSM, ASM, Unicast
Default: SSM

When the 

RxGOOSE1 MODE

 setting is other than R-GOOSE the value of this setting is not used. Otherwise it selects the 

R-GOOSE reception mode.

Summary of Contents for N60



























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for N60

2VV ESSENSSE NEO COMFORT Installation And Operation Instractions preview
ESSENSSE NEO COMFORT
Brand: 2VV Pages: 21
2VV AirGENIO SUPERIOR Manual preview
AirGENIO SUPERIOR
Brand: 2VV Pages: 27
Samson 3351 Mounting And Operating Instructions preview
3351
Brand: Samson Pages: 20
Maguire Products GRAVIMETRIC AUGER FEEDER MGF-ST Instruction Manual preview
GRAVIMETRIC AUGER FEEDER MGF-ST
Brand: Maguire Products Pages: 47
Magtrol DSP7000 User Manual preview
DSP7000
Brand: Magtrol Pages: 160
Comparato Compamix PR Instruction Manual preview
Compamix PR
Brand: Comparato Pages: 20
M-system Devicenet R7F4HD-DAC32C Instruction Manual preview
Devicenet R7F4HD-DAC32C
Brand: M-system Pages: 9
Universal Remote MX-5000 Specifications preview
MX-5000
Brand: Universal Remote Pages: 10
UCS SYNCHRO QUASAR AC User Manual preview
SYNCHRO QUASAR AC
Brand: UCS Pages: 10
Curtis MultiMode 1214-8 Manual preview
MultiMode 1214-8
Brand: Curtis Pages: 41
Nabtesco CONPAL NCB-8C-SR User Manual preview
CONPAL NCB-8C-SR
Brand: Nabtesco Pages: 24
Hahnel Giga T Pro II Instruction Manual preview
Giga T Pro II
Brand: Hahnel Pages: 36
maxon motor EPOS2 24/5 Hardware Reference Manual preview
EPOS2 24/5
Brand: maxon motor Pages: 44
Resol DeltaTherm E Installation, Operation, Functions And Options, Troubleshooting preview
DeltaTherm E
Brand: Resol Pages: 32
AccessPRO AccessPRO2 Installation And Connection Manual preview
AccessPRO2
Brand: AccessPRO Pages: 2
Baby Jogger Compact Pram Assembly Instructions Manual preview
Compact Pram
Brand: Baby Jogger Pages: 8
Transient Modules u1P Manual preview
u1P
Brand: Transient Modules Pages: 5
Pogo EZ Power Remote User Manual preview
EZ Power Remote
Brand: Pogo Pages: 1

Brands by name

Popular brands

Load more brands