manualshive.com logo in svg

GE N60, Instruction Manual

Introducing the Lenovo N60 - a sleek and powerful device designed to enhance your everyday computing experience. Get started quickly with our comprehensive Quick Start Manual, available for free download at manualshive.com. Access the manual effortlessly and uncover the full potential of your Lenovo N60.

Share
Download
background image

CHAPTER 5: SETTINGS

PRODUCT SETUP

N60 NETWORK STABILITY AND SYNCHROPHASOR MEASUREMENT SYSTEM – INSTRUCTION MANUAL

5-57

5

enables interoperability among intelligent electronic devices (IEDs) from different suppliers and interoperability among 
software configuration tools from different suppliers. Interoperability in this case is the ability for IEDs to operate on the 
same network or communication path sharing information and commands, and for configuration tools to understand 
each other's configuration files.
The UR family supports a large subset of IEC 61850 features. These are detailed in the UR Family Communications Guide 
and include the information model, GOOSE publish, GOOSE subscribe, buffered report server, unbuffered report server, and 
Manufacturing Message Specification (MMS) query, read, write, and control services. In addition, the URs and their 
EnerVista UR Setup software support IEC 61850 Substation Configuration Language (SCL) file import/export and merging.
Whereas prior UR releases used edition 1.0 of IEC 61850, this release uses edition 2.0, with certain modifications according 
to IEC/TR 61850-90-5. Only edition 2.0 61850 configuration tools can interoperate with edition 2.0 devices, such as the UR 
7.3x release. This UR release uses edition 2.0 SCL, which differs from edition 1.0 SCL. GSSE, fixed GOOSE, and fixed report 
services of previous releases are no longer supported, and thus UR devices of previous releases using these features have 
to be converted to configurable GOOSE to communicate with a 7.3x or later device.
Many settings of UR protection, control, and monitoring elements, that is to say elements that are not concerned with the 
IEC 61850 protocol, can nevertheless be accessed via IEC 61850. These settings are documented elsewhere in this Settings 
chapter. This section of the Settings chapter deals solely with the settings that configure the IEC 61850 protocol itself.
The maximum number of simultaneous clients supported by the UR family is five.

EnerVista setup for IEC 61850

The EnerVista UR Setup software provides the interface to configure N60 settings for the IEC 61850 protocol. This section 
describes this interface. The software also supports import/export and merging of IEC 61850 Substation Configuration 
Language (SCL) files as documented in the UR Family Communications Guide.
The IEC 61850 protocol configuration settings cannot be accessed through the UR front panel and are instead accessible 
with the EnerVista software, via MMS query, read, and write services, or via 61850 SCL file transfer. Accordingly, whereas 
other settings are presented in this manual as they appear on the front panel, IEC 61850 settings are presented as they 
appear in the software. See the UR Family Communications Guide for MMS and SCL access. Note that if you update the IEC 
61850 settings in the EnerVista software by writing to them by MMS while the corresponding IEC 61850 panel is open in 
EnerVista, you need to close then open the panel in EnerVista for the correct readings to display.
IEC 61850 protocol configuration settings are accessed through software panels that are selected either in the 

Online 

Window

 area (see figure) or the 

Offline Window

 area in the EnerVista software.

The EnerVista software also includes an interface that is compatible with firmware versions 5.0 to 7.2 to configure 
subscribers. Use the Simplified GOOSE Configurator in the Offline Window area.

Figure 5-18: IEC 61850 protocol panel in EnerVista software

Summary of Contents for N60



























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for N60

VAT 168 Series Installation, Operating, & Maintenance Instructions preview
168 Series
Brand: VAT Pages: 29
Balboa Instruments Dolphin Manual preview
Dolphin
Brand: Balboa Instruments Pages: 19
Wavelink Avalanche User Manual preview
Avalanche
Brand: Wavelink Pages: 69
Daikin Maverick I Operation Manual preview
Maverick I
Brand: Daikin Pages: 48
Daikin MicroTech III Operating Manual preview
MicroTech III
Brand: Daikin Pages: 77
Daikin MicroTech III Operation And Maintenance Manual preview
MicroTech III
Brand: Daikin Pages: 32
Daikin BRC1E71 Engineeiring Data preview
BRC1E71
Brand: Daikin Pages: 46
Daikin MicroTech III Installation And Maintenance Manual preview
MicroTech III
Brand: Daikin Pages: 14
Daikin DCS601C51 Hardware Manual preview
DCS601C51
Brand: Daikin Pages: 16
Daikin BRC944B2 Quick User Manual preview
BRC944B2
Brand: Daikin Pages: 1
Fantech ECO-TOUCH Operating Manual preview
ECO-TOUCH
Brand: Fantech Pages: 2
Sanhua MDF Series Instructions preview
MDF Series
Brand: Sanhua Pages: 3
OJ Electronics EFR Series Instructions Manual preview
EFR Series
Brand: OJ Electronics Pages: 8
OJ Electronics ETO2 Manual preview
ETO2
Brand: OJ Electronics Pages: 112
OJ EFS Series Instructions Manual preview
EFS Series
Brand: OJ Pages: 17
Paradox REM3 Instructions preview
REM3
Brand: Paradox Pages: 2
Paradox MG-RCV3 Reference & Installation Manual preview
MG-RCV3
Brand: Paradox Pages: 44
L-Acoustics LA8 Product Information preview
LA8
Brand: L-Acoustics Pages: 20

Brands by name

Popular brands

Load more brands