background image

About Qt

39

Bef

ore
 Us
ing
 the

 M

a

ch

ine

1

The precise terms and conditions for copying, distribution and modification follow. Pay close 
attention to the difference between a "work based on the library" and a "work that uses the 
library". The former contains code derived from the library, whereas the latter must be 
combined with the library in order to run.

                                             GNU LESSER GENERAL PUBLIC LICENSE

          TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION

0. This License Agreement applies to any software library or other program which contains 
a notice placed by the copyright holder or other authorized party saying it may be 
distributed under the terms of this Lesser General Public License (also called "this License"). 
Each licensee is addressed as "you".

A "library" means a collection of software functions and/or data prepared so as to be 
conveniently linked with application programs (which use some of those functions and 
data) to form executables.

The "Library", below, refers to any such software library or work which has been distributed 
under these terms. A "work based on the Library" means either the Library or any derivative 
work under copyright law: that is to say, a work containing the Library or a portion of it, 
either verbatim or with modifications and/or translated straightforwardly into another 
language. (Hereinafter, translation is included without limitation in the term 
"modification".)

"Source code" for a work means the preferred form of the work for making modifications to 
it. For a library, complete source code means all the source code for all modules it contains, 
plus any associated interface definition files, plus the scripts used to control compilation and 
installation of the library.

Activities other than copying, distribution and modification are not covered by this License; 
they are outside its scope. The act of running a program using the Library is not restricted, 
and output from such a program is covered only if its contents constitute a work based on 
the Library (independent of the use of the Library in a tool for writing it). Whether that is 
true depends on what the Library does and what the program that uses the Library does.

 1. You may copy and distribute verbatim copies of the Library's complete source code as 
you receive it, in any medium, provided that you conspicuously and appropriately publish on 
each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the 
notices that refer to this License and to the absence of any warranty; and distribute a copy 
of this License along with the Library.

You may charge a fee for the physical act of transferring a copy, and you may at your option 
offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Library or any portion of it, thus forming a work 
based on the Library, and copy and distribute such modifications or work under the terms of 
Section 1 above, provided that you also meet all of these conditions:

a) The modified work must itself be a software library.

Summary of Contents for Color C60














































































































































































































































































































































































Reviews: