Chapter 2 MultiLab Software
45
To display the cursors in split graph mode:
To display the cursors on the upper graph, use the same method as for single graph
mode.
To display the cursors on the lower graph, you must first remove them from the upper
graph and then double click anywhere on the lower graph to display the first cursor.
Double click a second time to display the second cursor, and double click a third time
to remove the cursors.
3. Zooming
To zoom in to the center of the graph
1. Click
Zoom in
on the graph toolbar.
2. To reverse the operation, click
Zoom out
on the graph toolbar.
To zoom in to a specific data point
1. Select the point with the cursor (see above).
2. Click
Zoom in
on the graph toolbar.
3. To reverse the operation click
Zoom out
on the graph toolbar.
To zoom in to a range
1. Select the range with both cursors.
2. Click
Zoom in
on the graph toolbar.
3. To reverse the operation click
Zoom out
on the graph toolbar.
To zoom in to a specific area
Click
Zoom to selection
on the graph toolbar and drag the cursor diagonally to
select the area you want to magnify. Release the mouse button to zoom in to the
selected area.
Click
Zoom to selection
a second time to disable the zoom tool.
Autoscale
Click
Autoscale
on the graph toolbar to view the full data display, or double click
on an axis to auto scale that axis alone.
Manual scaling
1. Click
Graph properties
on the graph toolbar to open the Graph
properties dialog box.
2. Select the
Scale
tab, and choose the axis you want to scale in the
Select
axis
drop list.
Summary of Contents for MultiLab
