Fourier MultiLab, User Manual

Page: 23 / 149

14 Chapter 1 MultiLogPRO
To use the photogates together with other sensors operate MultiLogPRO as a data
logger and then analyze the photogates data with the aid of MultiLab's Timing Wizard
(see page 90).
To perform a timing measurement:
1. Connect one or two photogates to MultiLogPRO
Note: MultiLogPRO must be in PC communication mode (see page 18)
2. Use the Forward and Backward arrow buttons to navigate
to the Timing menu
3. Press Enter to display the timing menu:
_ _ _ _ _ T I M I N G _ _ _ _ _
→ M o d e : T i m e S p e e d
M e a s u r e : I n 1
C a r d w i d t h : 3 0 m m
G a t e s d i s t a n c e : 2 0 c m
S t a r t ( > )
The arrow indicates that MultiLogPRO is ready to accept the timing
mode
4. Use the arrow buttons to select the desired timing mode:
Stopwatch , Time Speed or Time Speed Acc
1. Stopwatch
_ _ _ _ _ T I M I N G _ _ _ _ _
→
M o d e : S t o p w a t c h
M e a s u r e : _ _ _
C a r d w i d t h : _ _ _
G a t e s d i s t a n c e : _ _ _
S t a r t ( > )
In this mode MultiLogPRO operates as a standard stopwatch with resolution of 0.01s.
1. Press Enter four times, then press the Forward arrow to
enter the stopwatch mode
2. Press the Forward arrow to start measuring time
3. Press the Forward arrow a second time to stop the watch
4. Press the Backward arrow to reset the watch