Fourier MultiLab, User Manual

Page: 120 / 149

Chapter 3 Working with a TI Calculator 111
5. Use the numeric keypad in the TI calculator to enter sampling time
interval in seconds .
Tip: If you have entered a wrong value you can always press and enter a new
number.
6. Press
Note: The allowed time intervals are: 0.04, 0.1, 1, 10, 60, 600, 1800 and 3600
seconds. If you will enter another number MultiLab will automatically round it to the
nearest allowed time interval.
7. Enter the total number of sampling point (maximum of 1000 samples
unless otherwise indicated on the screen).
8. Press to return to the setup screen.
9. Press to accept the setup and return to the main menu.
The system is now ready to begin data logging
4. Start Recording
1. Press in the main menu to begin data logging.
For time intervals of 1 second or more, MultiLab displays the data
online. If the time interval is less than 1 second, data is retrieved by
MultiLab after logging ends.
MultiLab than displays the SELECT
GRAPH screen:
2. You can stop logging anytime by pressing