Fourier MultiLab, User Manual

Page: 128 / 149

Chapter 3 Working with a TI Calculator 119
MultiLab displays the Integral results screen
7. Press to return to the main menu
3.6. Data Collection Modes
MultiLab offers you several types of data collection modes. The default mode is TIME
GRAPH where data is collected in a predefined rate and then displayed on a graph
as a function of the time
The other data collection modes are:
LOG DATA – Downloading the last experiment from MultiLogPRO.
EVENTS WITH ENTRY – In this mode you can capture specific data points from
MultiLogPRO stream of data, like taking snapshots of the dynamic process. After
each capture MultiLab prompts you to enter a corresponding X value. When
capturing ends, MultiLab displays the data vs. the manually entered X values.
SINGLE POINT – The system collects 10 samples in 10 seconds and then displays
the average value.
SELECTED EVENT
–
Much like EVENTS WITH ENTRY except that the data is
displayed as a function of the time (no need to enter X values).
To select a certain data mode:
1. Press on the main menu to display the Setup menu then press
to enter the SELECT MODE menu:
2. Use the Up and Down keys to select the collection mode,
then press