Emerson Rosemount 5900S Series, Reference Manual

Page: 272 / 298

Table C-1: Resource Block Parameters
(continued)
Index
Number Parameter Description
82 FAILED_ENABLE Enabled FAILED_ALM alarm conditions. Corresponds bit for bit to the
FAILED_ACTIVE. A bit on means that the corresponding alarm condition
is enabled and will be detected. A bit off means the corresponding alarm
condition is disabled and will not be detected.
This parameter is the Read Only copy of FD_FAIL_MAP.
83 FAILED_MASK Mask of FAILED_ALM. Corresponds bit of bit to FAILED_ACTIVE. A bit on
means that the condition is masked out from alarming.
This parameter is the Read Only copy of FD_FAIL_MASK.
84 FAILED_ACTIVE Enumerated list of failure conditions within a device. All open bits are
free to be used as appropriate for each specific device.
This parameter is the Read Only copy of FD_FAIL_ACTIVE.
85 MAINT_PRI Designates the alarming priority of the MAINT_ALM
86 MAINT_ENABLE Enabled MAINT_ALM alarm conditions. Corresponds bit for bit to the
MAINT_ACTIVE. A bit on means that the corresponding alarm condition
is enabled and will be detected. A bit off means the corresponding alarm
condition is disabled and will not be detected.
This parameter is the Read Only copy of FD_OFFSPEC_MAP
87 MAINT_MASK Mask of MAINT_ALM. Corresponds bit of bit to MAINT_ACTIVE. A bit on
means that the condition is masked out from alarming.
This parameter is the Read Only copy of FD_OFFSPEC_MASK.
88 MAINT_ACTIVE Enumerated list of maintenance conditions within a device.
This parameter is the Read Only copy of FD_OFFSPEC_ACTIVE.
89 ADVISE_PRI Designates the alarming priority of the ADVISE_ALM
90 ADVISE_ENABLE Enabled ADVISE_ALM alarm conditions. Corresponds bit for bit to the
ADVISE_ACTIVE. A bit on means that the corresponding alarm condition
is enabled and will be detected. A bit off means the corresponding alarm
condition is disabled and will not be detected.
This parameter is the Read Only copy of FD_MAINT_MASK &
FD_CHECK_MASK.
91 ADVISE_MASK Mask of ADVISE_ALM. Corresponds bit by bit to ADVISE_ACTIVE. A bit on
means that the condition is masked out from alarming. This parameter is
the Read Only copy of FD_MAINT_MASK & FD_CHECK_MASK.
92 ADVISE_ACTIVE Enumerated list of advisory conditions within a device. All open bits are
free to be used as appropriate for each specific device.
This parameter is the Read Only copy of FD_MAINT_ACTIVE &
FD_CHECK_ACTIVE.
F
OUNDATION
™
Fieldbus Block Information Reference Manual
September 2019 00809-0100-5900
272 Reference Manual