Emerson Rosemount 5900S Series, Reference Manual, Page: 264 / 298

B.16.2 Europe
IA ATEX FISCO
Certificate Baseefa08ATEX0129X
Standards EN60079-0:2012+A11:2013, EN60079-11:2012
Markings
II 1 G Ex ia IIC T4 Ga (-60°C ≤ Ta ≤ +60°C)
Ui Ii Pi Ci Li
FISCO
parameters 17.5V 380 mA 5.32 W 0 µF 0 mH
Special Conditions for Safe Use (X):
1. If the equipment is fitted with an optional 90V transient suppressor, it is incapable
of withstanding the 500V isolation from earth test and this must be taken into
account during installation.
2. The enclosure may be made of aluminum alloy and given a protective polyurethane
paint finish; however care should be taken to protect it from impact and abrasion
when located in Zone 0.
B.16.3 International
IG IECEx FISCO
Certificate IECExBAS08.0045X
Standards IEC60079-0:2011, IEC60079-11:2011
Markings Ex ia IIC T4 Ga (-60°C ≤ Ta ≤ +60°C)
Ui Ii Pi Ci Li
FISCO
parameters 17.5V 380 mA 5.32 W 0 nF 0 µH
Special Conditions for Safe Use (X):
1. If the equipment is fitted with an optional 90V transient suppressor, it is incapable
of withstanding the 500V isolation from earth test and this must be taken into
account during installation.
2. The enclosure may be made of aluminum alloy and given a protective polyurethane
paint finish; however care should be taken to protect it from impact and abrasion
when located in Zone 0.
3. The equipment contains thin wall diaphragms. The installation, maintenance and
use shall take into account the environmental conditions to which the diaphragms
will be subjected. The manufacturer’s instructions for installation and maintenance
shall be followed in detail to assure safety during its expected lifetime.
Product Certifications Reference Manual
September 2019 00809-0100-5900
264 Reference Manual