Emerson Rosemount 5900S Series, Reference Manual

Page: 214 / 298

6.4 Resource block
Error conditions found in the Resource block.
Table 6-6: Resource Block BLOCK_ERR Messages
Condition Name Description
Block configuration error Configuration Error is used to indicate that you have selected an
item in FEATURES_SEL or CYCLE_SEL that was not set in
FEATURES or CYCLE_TYPE, respectively
Simulate active This indicates that the simulation switch is in place. This is not an
indication that the I/O blocks are using simulated data
Power up
Out of Service The actual mode is out of service
Table 6-7: Resource Block DETAILED_STATUS Messages
Condition Name Recommended action
Sensor Transducer block error 1. Restart processor
2. Call service center
Manufacturing block error 1. Restart processor
2. Call service center
Non-volatile memory error 1. Restart processor
2. Call service center
ROM integrity error 1. Restart processor
2. Call service center
6.5 Transducer block
Error conditions found in the transducer block.
Table 6-8: Transducer Block BLOCK_ERR Messages
Condition Name Description
Other error Set whenever XD_ERROR is non-zero. See also Viewing device
status in AMS Device Manager .
Out of Service The actual mode is out of service.
Service and troubleshooting Reference Manual
September 2019 00809-0100-5900
214 Reference Manual