Emerson ATCA-8310, Manual

Page: 410 / 460

CPLD and FPGA
ATCA-8310 Installation and Use (6806800M72D )
410
8.4.2.7.5 DSP Watchdog Interrupt Status Reset Register
Address: 0xA8, DspWdgStaResReg
Width: 16 bit
The bits of this register reset the respective bits in DspWdgStaReg. Writing a 1 to a bit in
DspWdgStaResReg resets the corresponding bit in DspWdgStaReg. The interrupt bit in
DspWdgStaReg is kept reset until writing a 0 to the corresponding bit in DspWdgStaResReg
reenables its monitor function again.
8 DspHev8 R 0b1: DspHev8, active if DSP8 has signaled a
Host Event interrupt to the Control Unit 0b0 F F
7 DspHev7 R 0b1: DspHev7, active if DSP7 has signaled a
Host Event interrupt to the Control Unit 0b0 F F
6 DspHev6 R 0b1: DspHev6, active if DSP6 has signaled a
Host Event interrupt to the Control Unit 0b0 F F
5 DspHev5 R 0b1: DspHev5, active if DSP5 has signaled a
Host Event interrupt to the Control Unit 0b0 F F
4 DspHev4 R 0b1: DspHev4, active if DSP4 has signaled a
Host Event interrupt to the Control Unit 0b0 F F
3 DspHev3 R 0b1: DspHev3, active if DSP3 has signaled a
Host Event interrupt to the Control Unit 0b0 F F
2 DspHev2 R 0b1: DspHev2, active if DSP2 has signaled a
Host Event interrupt to the Control Unit 0b0 F F
1 DspHev1 R 0b1: DspHev1, active if DSP1 has signaled a
Host Event interrupt to the Control Unit 0b0 F F
0 DspHev0 R 0b1: DspHev0, active if DSP0 has signaled a
Host Event interrupt to the Control Unit 0b0 F F
Table 8-203 DSP Host Event Interrupt Status Register (continued)
Bit Acronym Type Description Default Pwr Soft
Table 8-204 DSP Watchdog Interrupt Status Reset Register
Bit Acronym Type Description Default Pwr Soft
15...10 - - reserved undef - -