Emerson ATCA-8310 Manual Download Page 141

Page: 141 / 460

BIOS

ATCA-8310 Installation and Use (6806800M72D)

141

5.3.3.1.2 PEG Port Configuration

Figure 5-28 PEG Port Configuration

Table 5-29 PEG Port Configuration

Field

Description

Always Enable PEG

To enable the PEG slot.

Force X1

Force PEG link to retrain to X1 mode.

ASPM

Control ASPM support for the PEG Device. This has no effect if PEG is not
the currently active device.

Automatic ASPM

Automatically enable ASPM based on reported capabilities and known
issues.

Extended Synch

Enable PCIe Extended Synchronization for Logic Analyzer use.

Summary of Contents for ATCA-8310













































































































































































































































































































































































































































































Search results

Summary of Contents for ATCA-8310

Reviews:

Related manuals for ATCA-8310

Brands by name

Popular brands

Emerson ATCA-8310, Manual

Search results

Summary of Contents for ATCA-8310

Reviews:

Related manuals for ATCA-8310

Brands by name

Popular brands