Emerson ATCA-8310 Manual Download Page 117

Page: 117 / 460

BIOS

ATCA-8310 Installation and Use (6806800M72D)

117

5.3.2.3

Trusted Computing

Table 5-7 ACPI Settings Field Description

Field

Description

Enable ACPI Auto Conf

Enables or Disables BIOS ACPI Auto Configuration.

Enable Hibernation

Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This
option may not be effective with some OSs.

PTID Support

PTID Support will be loaded if enabled.

ACPI Sleep State

Select the highest ACPI sleep state the system will enter when the
SUSPEND button is pressed.

S3 Video Repost

On enabling, Video Option ROM will be dispatched during S3 resume.

Native PCIE Enable

PCI Express Native Support Enable/Disable. This feature is only available
in Vista.

Figure 5-7

Trusted Computing

Summary of Contents for ATCA-8310













































































































































































































































































































































































































































































Search results

Summary of Contents for ATCA-8310

Reviews:

Related manuals for ATCA-8310

Brands by name

Popular brands

Emerson ATCA-8310, Manual

Search results

Summary of Contents for ATCA-8310

Reviews:

Related manuals for ATCA-8310

Brands by name

Popular brands