Emerson ATCA-8310 Manual Download Page 169

Page: 169 / 460

U-Boot

ATCA-8310 Installation and Use (6806800M72D)

169

bootdelay

Delay in seconds before the automatic boot sequence starts.

A value of "-1" disables autoboot.

bcm_default_vlan

undefined

The default configuration of the ethernet switch.

Default: 0

tftpsilent

undefined

If set to 1 no hashes (#) are printed when loading images via
network.

srio_ft_deactivate

undefined

If set to 1, no device tree node for the SRIO controllers are created.

Default: 0

gpp_max_wait_bios

undefined

Time in micro-seconds. Specifies how long the "gpp start" command
waits for run level updates from the GPP/BIOS (run-level < 10).

Default: 10000000

gpp_max_wait_os

undefined

Time in micro-seconds. Specifies how long the "gpp start" command
waits for run level updates from the GPP/OS (run-level >= 10).

Default: 60000000

mv_learning_disable

undefined

If set to 1 MAC address learning for the base interface ports on the
base switch is disabled.

post_disable

undefined

If defined, no POST will be executed.

vx_info_addr

0x4c00

The address of a data structure evaluated by the Emerson vxWOrks
6.x board support package for the ATCA-8310.

serverip

undefined

The IP address of the boot server

ipaddr

undefined

The IP address used for network communication

gatewayip

undefined

The default gateway IP

ethprime

undefined

The default network device to use

ethrotate

undefined

If set, network commands will rotate through all available network
interfaces until the operation succeeds

bootm_low

The memory start address reported to the OS

bootm_size

undefined

Defines the memory size reported to the Linux OS. By default this is
the end of the physical memory. See description of "pram" below.

Table 6-3 Variables for Controlling the Boot Progress (continued)

Variable Name

Default

Description

Summary of Contents for ATCA-8310













































































































































































































































































































































































































































































Search results

Summary of Contents for ATCA-8310

Reviews:

Related manuals for ATCA-8310

Brands by name

Popular brands

Emerson ATCA-8310, Manual

Search results

Summary of Contents for ATCA-8310

Reviews:

Related manuals for ATCA-8310

Brands by name

Popular brands