32
32
EN
ESIM384 Installation and Configuration Manual v1.1
6. SMS PaSSWorD anD InStallEr CoDE
For security reasons, the system uses the following type of password and code:
SMS password –
4-digit password used for system arming/disarming and configuration by SMS text messages. By default, SMS password is
0000
, which MUSt be changed!. SMS password is authorized to carry out the following:
•
Access system configuration by SMS text messages.
•
Arm/disarm partition.
•
Activate/deactivate service mode.
•
Set system date and time.
•
Add/remove user phone numbers.
•
Set SMS password.
•
turn ON/OFF PGM outputs.
•
Restart system remotely.
Installer code
– 4-digit password used for system configuration by eKB2/eKB3/eKB3W/eWKB4 keypad and
ELDES Configuration
soft-
ware. By default, installer code is
1470
, which is highly recommended to change. Installer code is authorized to carry out the following:
•
Access system configuration by keypad and
ELDES Configuration
software.
•
Set installer code.
•
Set master code.
•
Activate/deactivate service mode.
•
Set system date and time.
•
Add/remove user phone numbers.
•
Set SMS password.
•
Restore system configuration to default.
•
Clear tamper fault (if enabled).
Set SMS password
SMS
SMS text message content:
wwww_PSW_ssss
Value:
wwww
– 4-digit existing SMS password;
ssss
– 4-digit new SMS password; range –
[0001... 9999].
Example:
0000_PSW_1111
EKB2
Menu path:
OK
→
iiii
→
OK
→
PRIMARY SETTINGS
→
OK
→
SMS PASSWORD
→
OK
→
ssss
→
OK
Value:
iiii
–
4-digit installer code;
ssss
– 4-digit new SMS password; range – [0001... 9999].
EKB3/
EKB3W/
EWKB4
Enter parameter 14 and new SMS password:
14 ssss #
Value:
ssss
– 4-digit new SMS password; range – [0001... 9999].
Example:
141111#
Config
tool
this operation may be carried out from the PC using the
ELDES Configuration
software.
Set installer code
EKB2
Menu path:
OK
→
1470
→
OK
→
PRIMARY SETTINGS
→
OK
→
INSTALLER CODE
→
OK
→
iiii
→
OK
Value:
iii
– 4-digit new installer code; range – [0000... 9999].
EKB3/
EKB3W/
EWKB4
Enter parameter 16 and new installer code:
16 iiii #
Value:
iiii
– 4-digit new installer code; range – [0000... 9999].
Example:
162538#
Config
tool
this operation may be carried out from the PC using the
ELDES Configuration
software.
