91
91
EN
ESIM384 Installation and Configuration Manual v1.1
board (top bar) are customizable, thus enabling the user to arrange the components in any way he/she wants.
to navigate through the menu, touch the desired main menu button representing a certain action or menu section. to enter a required
value, use the on-screen keyboard automatically appearing when necessary. typically, the configuration of the system by eWKB5 touchpad
is carried out by accessing the
Settings
menu secured with the master code.
19.10.3. How to arm the system by EWKB5
notE:
If the user fails to enter a correct user/master code 10 times in a row, the system will block the eWKB5 touchpad. While the touchpad
is blocked, the system prevents from completing any action. the touchpad will unblock once the alarm system is restarted (user may restart
alarm system by turning both mains power and backup power supply OFF or by sending an appropriate SMS command
ssss_restart
, where
“ssss” stands for user’s 4-digit SMS password, while the underscore character ”_” represents one space character).
1. to arm the system, touch the Partition button and enter a valid 4-digit user/master code PIN using the on-screen numpad. Alternatively,
the user can touch and hold the Quick Arm button in order to arm the system without entering the user code (Quick Arm button will let user
to arm all Partitions shown to the current touchpad). However, both methods require the user/master code in order to disarm the system.
If more than 1 Partition is being used, then after entering a valid 4-digit user/master code PIN user will get access to the additional
Partition
select menu
to choose Partitions which he wants to Arm or Disarm. Note that the user must enable/assign the Partition by using eldes
Configuration software first.
2. the system will initiate the exit delay countdown (by default – 15 seconds) intended for user to leave the secured premises. the count-
down initiation will be indicated by voice-guided instructions followed by short beeps emitted by the touchpad.
HOME: 27
o
C
HOME
Quick Arm
Fire
Settings
01:19
Panic
1
2
3
User PIN
4
5
6
7
8
C
0
9
ARMING
HOME: 27
o
C
HOME
Quick Arm
Fire
Settings
01:19
Panic
PART1
V0.0
Settings
01:19
PART2
PART3
PART4
Select partitions
PART1
PART2
PART3
PART4
