38
38
EN
ESIM384 Installation and Configuration Manual v1.1
10. MaStEr anD USEr CoDES
notE for EKB3/EKB3W/EWKB4:
the Configuration mode must remain deactivated before accessing master and user code manage-
ment using the master code.
the system supports up to 30 numeric codes, identified as Master code and User code 2 through 30, allowing to carry out system arming/
disarming as well as minor system configuration and control by the keypad.
Master code is authorized to carry out the following:
•
Arm/disarm partition.
•
Bypass violated zones.
•
View violated zones and tampers.
•
View system faults.
•
Set system date and time.
•
View temperature sensor information.
•
View event log,
•
View and clear alarm log,
•
Set/delete user codes.
•
turn ON/OFF PGM outputs.
•
Assign an existing user code as Duress code.
•
Assign an existing user code as SGS code.
User code is authorized to carry out the following:
•
Arm/disarm partition.
•
Bypass violated zones.
•
View violated zones and tampers.
•
View system faults.
•
Set system date and time.
•
View temperature sensor information.
•
View and clear alarm log.
By default, only Master code is listed as
1111
and assigned Partition 1
onlY
. For more details regarding User/Master code partition, please
refer to
23.4. User/Master Code Partition.
Set master code
EKB2
Menu path:
a)
OK
→
vvvv
→
OK
→
CODeS
→
OK
→
MASteR CODe
→
OK
→
CODe
→
OK
→
mmmm
→
OK
b)
OK
→
iiii
→
OK
→
PRIMARY SettINGS
→
OK
→
MASteR CODe
→
mmmm
→
OK
Value:
vvvv
– 4-digit existing master code, range – [0000... 9999];
iiii
– 4-digit installer code;
mmmm
– 4-digit new master code, range – [0000... 9999].
EKB3/
EKB3W/
EWKB4
a) Press , 0, enter existing master code and new master code:
0 vvvv 01 mmmm # mm #
Value:
vvvv
– 4-digit existing master code;
mmmm
- 4-digit new master code; range -
[0000... 9999].
Example:
01111012222#
b) (only when Configuration Mode is activated);
Enter parameter 63, existing master code and new master code:
63 vvvv mmmm #
Value:
vvvv
– 4-digit existing master code;
mmmm
– 4-digit new master code, range –
[0000... 9999].
Example:
6311112222#
ElDES
Config-
uration
software
this operation may be carried out from the PC using the
ELDES Configuration
software.
