30
30
EN
ESIM384 Installation and Configuration Manual v1.1
5.3. EKB3/EKB3W/EWKB4 lED Keypads
EKB3/
EKB3W/
EWKB4
the system configuration and control by eKB3/eKB3W/eWKB4 keypad is carried out by activating the Configuration mode
using the installer code (by default – installer code is 1470) and entering a valid configuration command using the number
keys
0
9
,
key for confirmation and
*
key to clear the characters that have been typed. Alternatively, the user
can wait for 10 seconds until the keypad buzzer will provide a long beep indicating that the entered characters have been
cleared. When typing in the characters, the indication of each pressed key is provided by short beep of keypad buzzer and
red indicators when the number keys
0
9
are being pressed. Some commands require
,
,
and
keys as
well. the structure of a standard configuration command is a combination of digits. the commands, which do not require the
Configuration mode being activated, are noted. the variables are provided in lower-case letters, while a valid parameter value
range is provided in brackets.
notE:
If you have accidentally typed in an unnecessary character, please press
*
key or wait for 10 seconds until the keypad buzzer will
provide a long beep indicating that the typed in characters have been cleared.
notE for EKB3W/EWKB4:
even if Back-light timeout has expired, the character will be considered as typed in once the appropriate eK-
B3W/eWKB4 key is pressed. For more details, please refer to
19.5.3. Wireless Communication, Sleep Mode and Back-light timeout
.
eN50131-1
GraDE 3
activate
Configuration mode
EKB3/
EKB3W
Enter installer and master codes:
iiiiii mmmmmm #
Value:
iiiiii
– 6-digit installer code;
mmmmmm
- 6-digit master code.
Example:
147000111111#
eN50131-1
GraDE 3
Deactivate
Configuration mode
EKB3/
EKB3W
Enter installer code:
iiiiii #
Value:
iiiiii
– 6-digit installer code.
Example:
147000#
the following table provides a list of eKB3/eKB3W/eWKB4 indications, which are relevant during Configuration mode.
Indication
Description
Indicator flashing
Configuration mode activated successfully.
Indicator flashing Valid parameter entered and awaiting for valid value to be entered.
1 long beep
Non-existing command or invalid parameter value entered.
3 short beeps
Command entered successfully.
notE:
the default installer code is 1470, while the default master code is 1111. By activating 6-digit password/code format, it will be neces-
sary to extend the installer code, master code and user code by adding 2 extra digits using
ELDES Configuration
software.
notE:
the system can be configured using only one keypad at a time. Other connected keypads will be inactive while the Configuration
mode is activated.
5.4. ElDES Configuration software
ElDES
Config-
uration
Software
ELDES Configuration
software is intended for eSIM384 alarm system configuration locally via USB port or remotely via GPRS
network or ethernet connection (eLAN3-ALARM device required). this software simplifies system configuration process by
allowing to use a personal computer in the process. Before starting to use
ELDES Configuration
software, please read the user
guide provided in the software’s documentation.
5.4.1. remote Connection
attEntIon:
the system will NOt transmit any data to monitoring station while configuring the system remotely via GPRS network or
ethernet connection. However, during the remote connection session, the data messages are queued up and transmitted to the monitor-
ing station after the configuration session is over.
attEntIon:
When the Configuration mode is activated by eKB3/eKB3W/eWKB4 keypad or when menu section CONFIGURAtION is
opened by the installer using eKB2 keypad, remote system configuration is disabled.
attEntIon:
the keypad (-s) become inactive while the system is being configured remotely.
ELDES Configuration
software
provides remote system configuration ability via Internet using one of the following methods:
•
eLDeS proxy server (recommended). the connection can be established on the system via GPRS network or ethernet using eLAN3-
ALARM communicator.
