35
35
EN
ESIM384 Installation and Configuration Manual v1.1
Delete user phone
number
SMS
SMS text message content:
ssss_NRup:DeL
Value:
ssss
– 4-digit SMS password;
up
– user phone number slot, range – [2... 10].
Example:
1111_NR2:DEL
EKB2
Menu path:
OK
→
iiii
→
OK
→
PRIMARY SettINGS
→
OK
→
CALL/SMS SettINGS
→
OK
→
USeRS
→
OK
→
GSM USeR 2... 10
→
OK
→
PHONe NUMBeR
→
OK
→
OK
Value:
iiii
– 4-digit installer code;
ElDES
Config-
uration
software
this operation may be carried out from the PC using the
ELDES Configuration
software.
attEntIon:
NeVeR add a phone number of the device’s SIM card as a user phone number!
attEntIon:
Once User 1 phone number is set, it will be restricted to modify it only.
notE:
Multiple user phone numbers can be set by a single SMS text message,
Example:
1144170911XXXX1_ NR2:+44170911XXXX2_NR6:0170911XXXX44170911XXXX4
notE:
Multiple user phone numbers can be deleted by a single SMS text message,
Example:
1111_NR2:DEL_NR3:DEL_NR6:DEL_NR9:DEL_
NR:10:DEL
8.1. User Phone number names
When the system is armed or disarmed by free of charge phone call or SMS text message, the system sends a confirmation by SMS text mes-
sage to user phone number that the system arming/disarming was initiated from. the SMS text message is sent regarding each partition
separately and contains system status and partition name as well as it may contain a user name, set to the user phone number.
Manage user phone
number name
ElDES
Config-
uration
software
this operation may be carried out from the PC using the
ELDES Configuration
software.
8.2. System Control from any Phone number
By default, once a user phone number is listed, the system ignores any incoming calls and SMS text messages from a non-listed phone
number as well as it rejects the SMS text messages containing wrong SMS password even from a listed user phone number. to permit/deny
system arming/disarming by phone call and SMS text message that contain a valid SMS password, configuration by SMS text message that
contain a valid SMS password from any phone number, please refer to the following configuration methods.
Enable system control
from any phone
number
SMS
SMS text message content:
ssss_StR:ON
Value:
ssss
– 4-digit SMS password.
Example:
1111_STR:ON
EKB2
Menu path:
OK
→
iiii
→
OK
→
PRIMARY SettINGS
→
OK
→
CALL/SMS SettINGS
→
OK
→
CtRL FROM ANY
NUM
→
OK
→
eNABLe
→
OK
Value:
iiii
– 4-digit installer code;
EKB3/
EKB3W/
EWKB4
Enter parameter 12 and parameter status value:
12 1 #
Example:
121#
ElDES
Config-
uration
software
this operation may be carried out from the PC using the
ELDES Configuration
software.
attEntIon:
Due to security reasons it is HIGHLY UNReCOMMeNDeD to enable this feature.
