88
88
EN
ESIM384 Installation and Configuration Manual v1.1
19.8. EW2 - Wireless Zone and PGM output Expansion Module
BA
TTER
Y
-
+
BA
TTER
Y
-
+
BA
TTER
Y
-
+
RESET
STATUS
POWER
ANT
Z1 Z2
Z3 Z4 T1
T2 C1 C2
COM
COM
COM
DC+
RESET
F1
45
Main features:
• 4 zone terminals.
• 2 open-collector outputs.
• Battery or externally-powered.
• Compatible with any third-party wired sensor or siren.
eW2 is a wireless device intended to expand eLDeS alarm system capabilities
by providing wireless connection access to any third-party wired devices. eW2
comes equipped with 4 zone terminals designed for wired digital sensor con-
nection, such as magnetic door contact, motion detector etc. In addition, the 2
open-collector outputs on board allow to connect any wired siren as well as to
connect and control any electrical appliance, such as gates, lights, watering etc.
the device can operate by powering it either using an external power supply or
3 x 1,5V AA type alkaline batteries on board. Once the external power supply is
disconnected, eW2 will automatically switch to battery power.
the maximum number of eW2 devices that can be paired with the system de-
pends on the number of the existing zones in system’s configuration. In case no
keypad zones, no ePGM1 zones, no virtual zones and no other wireless zones
exist, the system will support up to 16 eW2 devices.
For more details on technical specifications and installation, please refer to the
latest user manual of the device located at www.eldesalarms.com
19.9. EWM1 - Wireless Power Socket
LED indication
Type E, F
or G outlet
Button
for
restoring default
parameters or
turning ON/OFF
EWM1 when
paired with ELDES
alarm system
46
Main features:
•
Control your household equipment remotely by wireless keyfob,
keypad, eLDeS Cloud Services or automatically by scheduled time
or system event
•
Compatible with any 230V electrical appliance
•
View real-time, daily and monthly power consumption report
•
Fault indication and protection: circuit thermal, overvoltage, over-
current, undervoltage, relay fault indication.
eWM1 is a wireless device intended to expand eLDeS alarm system capabilities by providing a wireless connection access to any 230V
electrical appliance, such as lights, air-conditioner, watering equipment etc. By plugging the appliance into the electrical outlet of eWM1,
the user gains a possibility to control it by wireless keyfob, keypad, scheduled time or a specific system event. In addition, eWM1 lets you
monitor the power consumption and view the reports. In addition, the for safety and protection purposes eWM1 will prevent from powering
up the electrical appliance if certain fault conditions are present (see
29. InDICatIon of SYStEM faUltS
) In order to start using eWM1,
it has to be paired with eLDeS alarm system using
ELDES Configuration
software or by sending a corresponding SMS text message to eLDeS
alarm system.
It is possible to pair up to 32 eWM1 devices with the system at a time.
the maximum wireless connection range is 150m (492.13ft) (in open areas).
For more details on technical specifications and installation, please refer to the latest user manual of the device located at:
www.eldesalarms.com
to monitor real-time power consumption value , view today’s or monthly power consumption reports or reset the power consumption
counter, please refer to the following configuration methods.
View power
consumption reports
SMS
SMS text message content:
ssss_eWM1INFO
Value:
ssss
- 4-digit SMS password.
Example:
1111_EWM1INFO
