67
67
EN
ESIM384 Installation and Configuration Manual v1.1
16. taMPErS
the tamper circuit is a single closed loop such that a break in the loop at any point will cause a tamper alarm regardless of the system
status – armed or disarmed. During the tamper alarm, the system will activate the siren/bell and the keypad buzzer and send the SMS text
message to the listed user phone number. the system will cause tamper alarm under the following conditions:
•
If the enclosure of a detection device, siren/bell, metal cabinet or keypad is opened, the physical tamper switch will be triggered. By
default, indicated
as Tamper x
in the SMS text message (x = tamper number). User is able to change tamper’s name if he preffers to
(see
16.1. tamper names)
. Alternatively, the tamper switch can be connected to a zone resulting in zone alarm when tampered (see
15. ZonES
).
•
If the wireless signal is lost due to low signal level or low battery power on a certain wireless device (see
19.3. Wireless Signal Status
Monitoring
).
By default, all tampers and tamper alarm notification by SMS text message is enabled. to disable/enable a certain tamper and/or tamper
alarm notification, please refer to the following configuration methods:
Disable/enable
tamper
ElDES
Config-
uration
software
this operation may be carried out from the PC using the
ELDES Configuration
software.
View violated tampers
SMS
the system will automatically send an SMS text message, containing a violated tamper
name, to user phone number.
EKB2
EKB2 Menu path:
OK
→
uumm
→
OK
→
VIOLAteD tAMPeRS
→
OK
→
tAMPeR 1... 80
Value:
uumm
– 4-digit user/master code.
EKB3/
EKB3W/
EWKB4
the illuminated indicator represents system fault presence including violated tam per.
For more details on violated tamper indication, please refer to
29. InDICatIon of SYS tEM
faUltS
.
Disable tamper alarm
notification
EKB2
Menu path:
User phone number:
OK
→
iiii
→
OK
→
SMS MeSSAGeS 1
→
OK
→
tAMPeR ALARM
→
OK
→
GSM USeR 1... 10
→
OK
→
DISABLe
→
OK
SMS text message to all users simultaneously:
...
→
tAMPeR ALARM
→
OK
→
SMS tO ALL
→
OK
→
DISABLe
→
OK
SMS delivery report:
...
→
tAMPeR ALARM
→
OK
→
SMS RePORt
→
OK
→
DISABLe
→
OK
Value:
iiii
– 4-digit installer code.
EKB3/
EKB3W/
EWKB4
Enter parameter 25/21/55, event number, user phone number slot and parameter
status value:
User phone number:
25 13 up 0 #
SMS text message to all users simultaneously:
21 13 0 #
SMS delivery report:
55 13 0 #
Value:
up
- user phone number slot, range - [01... 10].
Example:
2513030#
ElDES
Config-
uration
software
this operation may be carried out from the PC using the
ELDES Configuration
software.
Enable tamper alarm
notification
EKB2
Menu path:
User phone number:
OK
→
iiii
→
OK
→
SMS MeSSAGeS 1
→
OK
→
tAMPeR ALARM
→
OK
→
GSM USeR 1... 10
→
OK
→
eNABLe
→
OK
SMS text message to all users simultaneously:
...
→
tAMPeR ALARM
→
OK
→
SMS tO ALL
→
OK
→
eNABLe
→
OK
SMS delivery report:
...
→
tAMPeR ALARM
→
OK
→
SMS RePORt
→
OK
→
eNABLe
→
OK
Value:
iiii
– 4-digit installer code.