For more information visit:
www.EatonElectrical.com
Inside EZD
MN05013005E
400
Information stored on the memory card is “non-volatile” and
thus you can use the card to archive, transfer and copy your
circuit diagram.
On the memory card you can save:
• the program,
• all the visualization data of the screens,
• all parameter settings of the circuit diagram,
– the system settings,
– debounce setting,
– P buttons,
– password,
– retention on/off and range,
– EZ-NET configuration,
– setting for automatic startup in Terminal mode,
– COM-LINK settings,
– DST settings,
– Card mode.
X
Insert the memory card in the open interface slot.
