For more information visit:
www.EatonElectrical.com
Commissioning
MN05013005E
100
Changing the EZ-NET network configuration
The configuration of the EZ-NET network can be modified at
any time at station 1, physical location 1.
X
The NET parameters are modified as described for
inputting parameters for the first time.
Station addresses in the STATIONS menu are changed as
follows:
X
Go to the physical location which is to be modified.
X
Press the
OK
button.
X
Select the required station number with the
Í
and
Ú
cursor
buttons and confirm your input with the
OK
button.
X
Configure all EZ-NET stations again using the
CONFIGURATION menu.
J
Existing station numbers can only be modified to free, non-
assigned station numbers. If all eight numbers are
assigned, all station numbers which are to be modified must
be set to zero. Thereafter, all station numbers can be
reassigned. (EZD sets all station numbers to zero which are
assigned a physical location behind the leading zero.)
J
Further information concerning the EZ-NET network topic
