Startup behavior
For more information visit:
www.EatonElectrical.com
MN05013005E
373
X
Otherwise select RUN MODE and press
OK.
RUN mode is activated.
X
Press
ESC
to return to the Status display.
Deactivating RUN mode
X
Select
RUN MODE
å
and press
OK
.
The RUN mode function is deactivated.
The default setting for EZD is for RUN MODE to be displayed.
In other words, EZD starts in
RUN MODE
å
when the
power is switched on.
Behavior when the circuit diagram is deleted
The setting for the startup behavior is an EZD device function.
When the circuit diagram is deleted, this does not result in the
loss of the setting selected.
Behavior during upload/download to card or PC
When a valid circuit diagram is transferred from EZD to a
memory card or the PC or vice versa, the setting is still
retained.
DEBOUNCE å Æ
P BUTTONS
RUN MODE
å
CARD MODE
æ
DEBOUNCE å Æ
P BUTTONS
RUN MODE
CARD MODE
æ
Startup behavior
Menu display
Status of EZD after
startup
EZD starts in STOP
mode
RUN MODE
EZD is in STOP mode
EZD starts in RUN mode
RUN MODE
å
EZD is in RUN mode
J
The EZD devices without a display can only be started in
RUN mode.