For more information visit:
www.EatonElectrical.com
EZD Settings
MN05013005E
360
Activating the password
You can activate an existing password in three different ways:
• automatically when EZD is switched on again,
• automatically after a protected circuit diagram is loaded
• automatically if a telegram has not been sent on the PC
interface 30 minutes after unlocking the device (using
EZSoft)
• via the password menu.
X
Press
DEL
and
ALT
to call up the System menu.
X
Open the password menu via the menu option
SECURITY…
EZD will only show this password menu if a password is
present.
X
Select ACTIVATE PW and confirm with
OK
.
The password is now active. EZD will automatically return to
the Status display.
CHANGE PW
ACTIVATE
J
Make a note of the password before you activate it. If the
password is no longer known, EZD can be unlocked
(DELETE FUNCTION is not active), however, the circuit
diagram and data settings will be lost.
Attention!
If the password is unknown or lost, and the delete password
function is deactivated: The unit can only be reset to the
factory setting by the manufacturer. The program and all
data are lost.
