For more information visit:
www.EatonElectrical.com
Programming wiring
MN05013005E
256
– IA03: terminal I11
– IA04: terminal I12
• Analog output QA01
• Actual value
…
QV> of another function block
Displaying the parameter set in the PARAMETERS menu
• + Access enabled
• – Access disabled
Coils
ST01EN, enable coil.
Memory requirement of the function block
The set cycle time function block requires 24 bytes of memory
plus 4 bytes per constant on the function block input.
Function of the set cycle time function block
The function block is used to define a fixed cycle time.
Actual cycle time is less than the set cycle time:
If the maximum cycle time present is less than the set cycle
time, the set cycle time is constant.
Actual cycle time is greater than the set cycle time:
If the maximum cycle time present is greater than the set cycle
time, the set cycle time has no effect.
J
The function block must be enabled so that it can work. Coil
ST01EN is active. If coil ST01EN is not active, the entire
function block is deactivated and reset.
