For more information visit:
www.EatonElectrical.com
Visualization with EZD
MN05013005E
308
Screen 6:
Screen 6 shows a simple example of the display change using
an external trigger. In this example input I1 is the external
trigger. The screen contains two numerical values. These are
associated with the output QV of timing relay T08 which is a
DWord type variable. The timing relay is run in a loop from 0
to 10 seconds.
Table 16: Numerical value – analog value output with display
change via external trigger input
Figure 165: External trigger
General
settings:
Value range from 0 to 11000; unit of measure:
s (seconds); scaling range from 0 to 11, two
decimal places; display change active;
detection via external trigger input
Left numerical
value:
Display of timing relay value T08,
I1 actuated: the numerical value flashes as the
external trigger is set for flashing display via
Boolean operand I1
Right
numerical
value:
Display of timing relay value T08;
I1 actuated: the numerical value is inverted as
the external trigger is set for inverted display via
Boolean operand I1
Display
change (I1)
external trigger
3.37s
3.37s
