Configuration of the EZ-NET network
For more information visit:
www.EatonElectrical.com
MN05013005E
339
Configuration of the EZ-NET
network
EZ-NET can be configured so that it can be optimized for your
application.
Station number
The station number is identified as the EZ-NET-ID: in the
device. The station number can be set on devices with a
display using the buttons on the EZD.
Valid station numbers for operation are 01 to 08.
Station number 00 = factory default setting
With station number 00, double address assignment cannot
occur when an existing device is being exchanged.
Transmission speed
The EZD device hardware allows you set transmission
speeds between 10 and 1000 Kbaud in specific stages. The
length of all cables determines the maximum permissible data
transfer rate (
chapter “Technical data”, Page 426).
The data transfer rate is set under the BAUDRATE: menu
item.
Possible baud rates are: 10, 20, 50, 125, 250, 500 and
1000 kB
125 kB = factory default setting
J
All the EZ-NET settings are best carried out on station 1.
The entire network can be configured via station 1. The
configuration should only be carried out locally when a
device is replaced.