Eaton EZD Series User Manual Download Page 232

Page: 232 / 448

For more information visit:

www.EatonElectrical.com

Programming wiring

MN05013005E

228

Time overlaps

The time settings of a time switch overlap. The clock switches

on at 16:00 on Monday, whereas on Tuesday and Wednesday

it switches on at 10:00. On Monday to Wednesday the

switching-off time is 22:00.

Figure 119: Signal diagram of overlaps

Response in the event of a power failure

The power is removed between 15:00 and 17:00. The relay

drops out and remains off, even after the power returns, since

the first switching-off time was at 16:00.

HW04 A

>DY1 MO
>DY2 WE
>ON 16:00
>OFF 22:00

HW04 B

>DY1 TU
>DY2 WE
>ON 10:00
>OFF 00:00

Switch-on and switch-off times are always based on the

channel which switches first.

HW05 A

>DY1 MO
>DY2 SU
>OFF 16:00

HW05 B

>DY1 MO
>DY2 SU
>ON 12:00
>OFF 18:00

When switched on, EZD always updates the switching state

on the basis of all the available switching time settings.

Summary of Contents for EZD Series

































































































































































































































































































































































































































































Search results

Summary of Contents for EZD Series

Reviews:

Related manuals for EZD Series

Brands by name

Popular brands

Eaton EZD Series, User Manual

Search results

Summary of Contents for EZD Series

Reviews:

Related manuals for EZD Series

Brands by name

Popular brands