For more information visit:
www.EatonElectrical.com
Commissioning
MN05013005E
90
Wiring
EZD displays a small arrow
l
in the circuit diagram when
creating the wiring.
Press
ALT
to activate the wiring arrow cursor and use the
cursor buttons
Í Ú ú í
to move it.
The wiring arrow works between contacts and relays. When
you move the arrow onto a contact or relay coil, it changes
back to the cursor and can be reactivated with ALT if required.
X
Press
ALT
to wire the cursor from
I 02
through to the coil
field.
The cursor changes into a flashing wiring arrow and
automatically jumps to the next possible wiring position.
X
Press the cursor button
í
. Contact
I 02
will be connected
up to the coil field.
J
ALT
also has two other functions depending on the cursor
position:
• In the left contact field, you can press
ALT
to insert a new
empty rung.
• The contact under the cursor can be changed between a
make and break contact by pressing the
ALT
button.
ÊÊÊÊÊÊÊ-ÊÊÊÊÊÊÊ-
ÊÊÊÊlÊÊ-ÊÊÊÊÊÊÊ-
ÊÊÊÊÊÊÊ-ÊÊÊÊÊÊÊ-
L: 1 C:1 B:7944
M
l
L
m
J
EZD automatically wires adjacent contacts in a rung up to
the coil.
-I 02
l
J
You can use
DEL
to erase a connection at the cursor or
arrow position. Where connections intersect, the vertical
connections are deleted first, then, if you press
DEL
again,
the horizontal connections are deleted.
