Password protection
For more information visit:
www.EatonElectrical.com
MN05013005E
359
X
Save the new password by pressing
OK
.
Use
OK
to exit the password display and proceed with
ESC
and
Ú
to the RANGE… menu.
The scope of the password has not yet been considered. The
password is now valid but not yet activated.
Selecting the scope of the password
X
Press the
OK
button.
X
Select the function to be protected or the menu.
X
Press the
OK
button in order to protect the function or menu
(tick = protected).
• CIRCUIT DIAGRAM: The password is effective on the
program with circuit diagram and non-enabled function
blocks.
• PARAMETERS: The PARAMETERS menu is protected.
• TIME: Date and time are protected with the password.
• OPERATING MODE: The toggling of the RUN or STOP
operating mode is protected.
• INTERFACE: The interface is inhibited for access to a
connected device. Programs or commands to other devices
connected via the NET network are routed further.
• DELETE FUNCT.: After four failed attempts to enter a
password, the “DELETE FUNCTION?” prompt appears.
This prompt is not displayed if selected. However, it is no
longer possible to make changes in protected areas if you
forget the password.
ENTER PASSWORD
000042
CIRCUIT DIAGRAMåÆ
PARAMETERS
TIME
OPERATING MODE
æ
INTERFACE
DELETE FUNCT.
J
Standard protection encompasses the programs and circuit
diagram.
At least one function or menu must be protected.
