For more information visit:
www.EatonElectrical.com
Commissioning
MN05013005E
114
The following applies if the device to be operated is in RUN
mode and is displaying a screen:
This screen is not displayed in Terminal mode.
EZD message: “The remote device is in Graphic mode.”
X
Press the ALT and
ESC
button simultaneously.
This will call up the Status display.
The EZ-NET station 2 controls the display of the EZD device.
J
If the text “Connection establishment in progress...” is
displayed for longer than 10 s, the connection to the
selected device is faulty. Press
ESC
to cancel the selection.
Rectify the fault. Try to re-establish the connection.
The remote
device is in
Graphic mode
I 1..4..789...
*
I NT2
P-
TU 06.05.2003
Q 1..45678 RUN
J
The activation of Terminal mode is indicated by the flashing
star at the top right of the Status display.
Caution!
In Terminal mode, you can operate a device that may be
positioned far from your actual location. All access rights
that you would also require "locally" are granted to you. It is
not always possible to obtain a view of the situation
“locally”. Use of this operating mode and the execution of
any changes to device settings should only be carried out
with the utmost caution.
A device with a display and operating unit can also be
operated locally. In this case, operation at the device
concerned is always faster than operation via Terminal
mode. Bear in mind that this may lead to conflicts that may
trigger faults or unforeseen events.
