manualshive.com logo in svg

Dräger Atlan A300, Instructions For Use Manual

Share
Download
Dräger Atlan A300 Instructions For Use Manual Download Page 294

294 

 Instructions for use

  |  

Atlan A300, A300 XL, A350, A350 XL SW 1.0n

Technical data

16.25 

Connections to IT networks

In an IT network, data can be exchanged by means of wired or wireless 
technologies. An IT network can be any data interface (e.g., RS232, LAN, USB, 
printer interface) that is described in standards and conventions.

Connecting this device to a network that incorporates other devices or making 
subsequent changes to that network can lead to new risks for patients, users, and 
third parties. Before the device is connected to the network or the network is 
changed, these risks must be identified, analyzed, and evaluated by the hospital IT 
representative in accordance with the IEC 80001-1 standard (risk management for 
medical IT networks). Appropriate measures must be taken on the basis of the 
results.

Examples of subsequent changes to the network:
– Changing the network configuration
– Removing devices from the network
– Adding new devices to the network
– Performing upgrades or updates on devices that are connected to the network

16.25.1 LAN 

interface

16.25.1.1 Service

In conjunction with the Dräger SCG (ServiceConnect Gateway) or a DrägerService 
computer, the LAN interface enables the following functions:
– Using the SNMP protocol:

Monitoring the service status of the device, querying the service status, support 
during the installation of device software and during software download, 
configuration support

– Using the FTP protocol (as a client):

Querying the device status, support during the installation of device software 
and during software download, configuration support

The following personal data are transmitted unencrypted over the interface:
– Logbook with details of age, weight, and height of the patient

16.25.1.2 Time 

synchronization

The LAN interface allows synchronization with an NTP (Network Time Protocol) 
server using the NTP protocol.

16.25.1.3 Required 

characteristics

The LAN must be securely isolated from other networks and no devices may be 
connected that could be potential sources for malicious attacks.

The LAN must ensure the connection between the device and the following 
destinations:
– ServiceConnect Gateway or DrägerService Computer:
– NTP  server

Summary of Contents for Atlan A300













































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands