Digisol DG-FS4526E, Management Manual

Page: 995 / 1162

C
HAPTER
38 | Multicast Filtering Commands
Multicast VLAN Registration
– 995 –
show mvr
This command shows information about the global MVR configuration
settings when entered without any keywords, the interfaces attached to
the MVR VLAN using the interface keyword, or the multicast groups
assigned to the MVR VLAN using the members keyword.
S
YNTAX
show mvr [ interface [ interface ] | members [ ip-address |
host-ip-address [ interface ] | sort-by-port [ interface ]]]
interface
ethernet unit / port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-26)
port-channel channel-id (Range: 1-13)
ip-address - IP address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255)
D
EFAULT
S
ETTING
Displays global configuration settings for MVR when no keywords are used.
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
Enter this command without any keywords to display the global settings for
MVR. Use the interface keyword to display information about interfaces
attached to the MVR VLAN, the members keyword to display information
about multicast groups assigned to the MVR VLAN, the host-ip-address
keyword to display the IP address of the hosts subscribing to all active
multicast groups, or the sort-by-port keyword to display the multicast
groups associated with each port.
E
XAMPLE
The following shows the global MVR settings:
Console#show mvr
MVR Config Status : Enabled
MVR Running Status : Active
MVR Multicast VLAN : 1
MVR Current Learned Groups : 1
MVR Forwarding Priority : 1
MVR Upstream Source IP : 192.168.0.3
MVR Group Range :
Start End
--------------- ---------------
228.1.23.1 228.1.23.10
Console#