Digisol DG-FS4526E, Management Manual

Page: 129 / 1162

– 129 –
5
I
NTERFACE
C
ONFIGURATION
This chapter describes the following topics:
Port Configuration – Configures connection settings, including auto-
negotiation, or manual setting of speed, duplex mode, and flow control.
Local Port Mirroring – Sets the source and target ports for mirroring on
the local switch.
Remote Port Mirroring – Configures mirroring of traffic from remote
switches for analysis at a destination port on the local switch.
Displaying Statistics – Shows Interface, Etherlike, and RMON port
statistics in table or chart form.
Cable Test – Performs cable diagnostics on the specified port.
Trunk Configuration – Configures static or dynamic trunks.
Saving Power – Adjusts the power provided to ports based on the
length of the cable used to connect to other devices.
Traffic Segmentation – Configures the uplinks and down links to a
segmented group of ports.
VLAN Trunking – Configures a tunnel across one or more intermediate
switches which pass traffic for VLAN groups to which they do not
belong.
P
ORT
C
ONFIGURATION
This section describes how to configure port connections, mirror traffic
from one port to another, and run cable diagnostics.
C
ONFIGURING BY
P
ORT
L
IST
Use the Interface > Port > General (Configure by Port List) page to enable/
disable an interface, set auto-negotiation and the interface capabilities to
advertise, or manually fix the speed, duplex mode, and flow control.
CLI R
EFERENCES
"Interface Commands" on page 783