Digisol DG-FS4526E, Management Manual

Page: 347 / 1162

C
HAPTER
14 | Security Measures
Configuring 802.1X Port Authentication
– 347 –
3.
Enable 802.1X globally for the switch, and configure EAPOL Pass
Through if required. Then set the user name and password to use when
the switch responds an MD5 challenge from the authentication server.
4. Click Apply
Figure 192: Configuring Global Settings for 802.1X Port Authentication
C
ONFIGURING
P
ORT
A
UTHENTICATOR
S
ETTINGS FOR
802.1X
Use the Security > Port Authentication (Configure Interface –
Authenticator) page to configure 802.1X port settings for the switch as the
local authenticator. When 802.1X is enabled, you need to configure the
parameters for the authentication process that runs between the client and
the switch (i.e., authenticator), as well as the client identity lookup process
that runs between the switch and authentication server.
CLI R
EFERENCES
"802.1X Port Authentication" on page 697
C
OMMAND
U
SAGE
When the switch functions as a local authenticator between supplicant
devices attached to the switch and the authentication server, configure
the parameters for the exchange of EAP messages between the
authenticator and clients on the Authenticator configuration page.
When devices attached to a port must submit requests to another
authenticator on the network, configure the Identity Profile parameters
on the Configure Global page (see "Configuring 802.1X Global Settings"
on page 346 ) which identify this switch as a supplicant, and configure
the supplicant parameters for those ports which must authenticate
clients through the remote authenticator (see "Configuring Port
Supplicant Settings for 802.1X" on page 351 ).
This switch can be configured to serve as the authenticator on selected
ports by setting the Control Mode to Auto on this configuration page,
and as a supplicant on other ports by the setting the control mode to
Force-Authorized on this page and enabling the PAE supplicant on the
Supplicant configuration page.