Digisol DG-FS4526E, Management Manual

Page: 625 / 1162

C
HAPTER
21 | System Management Commands
Time Range
– 625 –
absolute
This command sets the time range for the execution of a command. Use
the no form to remove a previously specified time.
S
YNTAX
absolute start hour minute day month year
[ end hour minutes day month year ]
absolute end hour minutes day month year
no absolute
hour - Hour in 24-hour format. (Range: 0-23)
minute - Minute. (Range: 0-59)
day - Day of month. (Range: 1-31)
month - january | february | march | april | may | june | july |
august | september | october | november | december
year - Year (4-digit). (Range: 2009-2109)
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Time Range Configuration
C
OMMAND
U
SAGE
If a time range is already configured, you must use the no form of this
command to remove the current entry prior to configuring a new time
range.
E
XAMPLE
This example configures the time for the single occurrence of an event.
Console(config)#time-range r&d
Console(config-time-range)#absolute start 1 1 1 april 2009 end 2 1 1 april
2009
Console(config-time-range)#
periodic
This command sets the time range for the periodic execution of a
command. Use the no form to remove a previously specified time range.
S
YNTAX
[ no ] periodic { daily | friday | monday | saturday | sunday |
thursday | tuesday | wednesday | weekdays | weekend }
hour minute to { daily | friday | monday | saturday | sunday |
thursday | tuesday | wednesday | weekdays | weekend |
hour minute }
daily - Daily
friday - Friday