Digisol DG-FS4526E, Management Manual

Page: 134 / 1162

C
HAPTER
5 | Interface Configuration
Port Configuration
– 134 –
W
EB
I
NTERFACE
To display port connection parameters:
1. Click Interface, Port, General.
2. Select Show Information from the Action List.
Figure 26: Displaying Port Information
C
ONFIGURING
L
OCAL
P
ORT
M
IRRORING
Use the Interface > Port > Mirror page to mirror traffic from any source
port to a target port for real-time analysis. You can then attach a logic
analyzer or RMON probe to the target port and study the traffic crossing
the source port in a completely unobtrusive manner.
Figure 27: Configuring Local Port Mirroring
CLI R
EFERENCES
"Local Port Mirroring Commands" on page 815
C
OMMAND
U
SAGE
Traffic can be mirrored from one or more source ports to a destination
port on the same switch (local port mirroring as described in this
section), or from one or more source ports on remote switches to a
destination port on this switch (remote port mirroring as described in
"Configuring Remote Port Mirroring" on page 136 ).
Monitor port speed should match or exceed source port speed,
otherwise traffic may be dropped from the monitor port.
When mirroring port traffic, the target port must be included in the
same VLAN as the source port when using MSTP (see "Spanning Tree
Algorithm" on page 207 ).
Source
port(s) Single
target
port