Digisol DG-FS4526E, Management Manual

Page: 604 / 1162

C
HAPTER
21 | System Management Commands
Line
– 604 –
E
XAMPLE
Console(config-line)#password 0 secret
Console(config-line)#
R
ELATED
C
OMMANDS
login (601)
password-thresh (604)
password-thresh
This command sets the password intrusion threshold which limits the
number of failed logon attempts. Use the no form to remove the threshold
value.
S
YNTAX
password-thresh [ threshold ]
no password-thresh
threshold - The number of allowed password attempts.
(Range: 1-120; 0: no threshold)
D
EFAULT
S
ETTING
The default value is three attempts.
C
OMMAND
M
ODE
Line Configuration
C
OMMAND
U
SAGE
When the logon attempt threshold is reached, the system interface
becomes silent for a specified amount of time before allowing the next
logon attempt. (Use the silent-time command to set this interval.) When
this threshold is reached for Telnet, the Telnet logon interface shuts down.
E
XAMPLE
To set the password threshold to five attempts, enter this command:
Console(config-line)#password-thresh 5
Console(config-line)#
R
ELATED
C
OMMANDS
silent-time (605)