Digisol DG-FS4526E, Management Manual

Page: 591 / 1162

C
HAPTER
21 | System Management Commands
File Management
– 591 –
copy
This command moves (upload/download) a code image or configuration file
between the switch’s flash memory and an FTP/TFTP server. When you
save the system code or configuration settings to a file on an FTP/TFTP
server, that file can later be downloaded to the switch to restore system
operation. The success of the file transfer depends on the accessibility of
the FTP/TFTP server and the quality of the network connection.
S
YNTAX
copy file { file | ftp | running-config | startup-config | tftp }
copy running-config { file | ftp | startup-config | tftp }
copy startup-config { file | ftp | running-config | tftp }
copy tftp { file | https-certificate | public-key |
running-config | startup-config }
file - Keyword that allows you to copy to/from a file.
ftp - Keyword that allows you to copy to/from an FTP server.
https-certificate - Keyword that allows you to copy the HTTPS
secure site certificate.
public-key - Keyword that allows you to copy a SSH key from a
TFTP server. ( See "Secure Shell" on page 687. )
running-config - Keyword that allows you to copy to/from the
current running configuration.
startup-config - The configuration used for system initialization.
tftp - Keyword that allows you to copy to/from a TFTP server.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
The system prompts for data required to complete the copy command.
The destination file name should not contain slashes (\ or /), and the
maximum length for file names is 31 characters for files on the switch.
(Valid characters: A-Z, a-z, 0-9, “.”, “-”)
The switch supports only two operation code files, but the maximum
number of user-defined configuration files is 16.
You can use “Factory_Default_Config.cfg” as the source to copy from
the factory default configuration file, but you cannot use it as the
destination.
To replace the startup configuration, you must use startup-config as
the destination.