Digisol DG-FS4526E, Management Manual

Page: 772 / 1162

C
HAPTER
26 | Access Control Lists
IPv6 ACLs
– 772 –
This allows any packets sent to the destination 2009:DB9:2229::79/48
when the next header is 43.”
Console(config-ext-ipv6-acl)#permit 2009:DB9:2229::79/48 next-header 43
Console(config-ext-ipv6-acl)#
R
ELATED
C
OMMANDS
access-list ipv6 (768)
Time Range (624)
show ipv6 access-
list
This command displays the rules for configured IPv6 ACLs.
S
YNTAX
show ipv6 access-list { standard | extended } [ acl-name ]
standard – Specifies a standard IPv6 ACL.
extended – Specifies an extended IPv6 ACL.
acl-name – Name of the ACL. (Maximum length: 16 characters)
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
Console#show ipv6 access-list standard
IPv6 standard access-list david:
permit host 2009:DB9:2229::79
permit 2009:DB9:2229:5::/64
Console#
R
ELATED
C
OMMANDS
permit, deny (Standard IPv6 ACL) (769)
permit, deny (Extended IPv6 ACL) (770)
ipv6 access-group (772)
ipv6 access-group
This command binds a port to an IPv6 ACL. Use the no form to remove the
port.
S
YNTAX
ipv6 access-group acl-name in [ time-range time-range-name ]
no ipv6 access-group acl-name in
acl-name – Name of the ACL. (Maximum length: 16 characters)
in – Indicates that this list applies to ingress packets.
time-range-name - Name of the time range.
(Range: 1-30 characters)