Digisol DG-FS4526E, Management Manual

Page: 585 / 1162

C
HAPTER
21 | System Management Commands
System Status
– 585 –
This command displays settings for key command modes. Each mode
group is separated by “!” symbols, and includes the configuration mode
command, and corresponding commands. This command displays the
following information:
MAC address for the switch
SNMP community strings
SNMP trap authentication
RMON alarms settings
Users (names and access levels)
VLAN database (VLAN ID, name and state)
Multiple spanning tree instances (name and interfaces)
Interface settings and VLAN configuration settings for each interface
IP address for management VLAN
Any configured settings for the console port and Telnet
E
XAMPLE
Refer to the example for the running configuration file.
R
ELATED
C
OMMANDS
show running-config (583)
show system
This command displays system information.
D
EFAULT
S
ETTING
None
C
OMMAND
M
ODE
Normal Exec, Privileged Exec
C
OMMAND
U
SAGE
For a description of the items shown by this command, refer to
"Displaying System Information" on page 101 .
If any POST test indicates “FAIL,” contact your distributor for
assistance.
E
XAMPLE
Console#show system
System Description : DG-FS4526E
System OID String : 1.3.6.1.4.1.36293.1.1.1.16
System Information
System Up Time : 0 days, 4 hours, 10 minutes, and 27.90 seconds
System Name :
System Location :
System Contact :
MAC Address (Unit 1) : 00-17-7C-0C-8F-EE
Web Server : Enabled
Web Server Port : 80
Web Secure Server : Enabled
Web Secure Server Port : 443
Telnet Server : Enabled
Telnet Server Port : 23