Digisol DG-FS4526E, Management Manual

Page: 881 / 1162

C
HAPTER
34 | ERPS Commands
– 881 –
node-id
This command sets the MAC address for a ring node. Use the no form to
restore the default setting.
S
YNTAX
node-id mac-address
mac-address – A MAC address unique to the ring node. The MAC
address must be specified in the format xx-xx-xx-xx-xx-xx or
xxxxxxxxxxxx.
D
EFAULT
S
ETTING
CPU MAC address
C
OMMAND
M
ODE
ERPS Configuration
C
OMMAND
U
SAGE
The ring node identifier is informational, and does not affect ring protection
switching operations. It may be used for debugging, such as to distinguish
messages when a node is connected to more than one ring.
E
XAMPLE
Console(config-erps)#node-id 00-17-7C-61-24-2D
Console(config-erps)#
ring-port
This command configures a node’s connection to the ring through the east
or west interface. Use the no form to disassociate a node from the ring.
S
YNTAX
ring-port { east | west } interface interface
east - Connects to next ring node to the east.
west - Connects to next ring node to the west.
interface
ethernet unit / port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-26)
D
EFAULT
S
ETTING
Not associated
C
OMMAND
M
ODE
ERPS Configuration
C
OMMAND
U
SAGE
Each node must be connected to two neighbors on the ring. For
convenience, the ports connected are referred to as east and west ports.