Digisol DG-FS4526E, Management Manual

Page: 805 / 1162

C
HAPTER
28 | Link Aggregation Commands
– 805 –
C
OMMAND
U
SAGE
This command applies to all static and dynamic trunks on the switch.
To ensure that the switch traffic load is distributed evenly across all
links in a trunk, select the source and destination addresses used in the
load-balance calculation to provide the best result for trunk
connections:
dst-ip : All traffic with the same destination IP address is output on
the same link in a trunk. This mode works best for switch-to-router
trunk links where traffic through the switch is destined for many
different hosts. Do not use this mode for switch-to-server trunk
links where the destination IP address is the same for all traffic.
dst-mac : All traffic with the same destination MAC address is
output on the same link in a trunk. This mode works best for
switch-to-switch trunk links where traffic through the switch is
destined for many different hosts. Do not use this mode for switch-
to-router trunk links where the destination MAC address is the same
for all traffic.
src-dst-ip : All traffic with the same source and destination IP
address is output on the same link in a trunk. This mode works best
for switch-to-router trunk links where traffic through the switch is
received from and destined for many different hosts.
src-dst-mac : All traffic with the same source and destination MAC
address is output on the same link in a trunk. This mode works best
for switch-to-switch trunk links where traffic through the switch is
received from and destined for many different hosts.
src-ip : All traffic with the same source IP address is output on the
same link in a trunk. This mode works best for switch-to-router or
switch-to-server trunk links where traffic through the switch is
received from many different hosts.
src-mac : All traffic with the same source MAC address is output on
the same link in a trunk. This mode works best for switch-to-switch
trunk links where traffic through the switch is received from many
different hosts.
E
XAMPLE
Console(config)#port-channel load-balance dst-ip
Console(config)#