Digisol DG-FS4526E, Management Manual

Page: 263 / 1162

C
HAPTER
12 | Quality of Service
Attaching a Policy Map to a Port
– 263 –
To show the rules for a policy map:
1.
Click Traffic, DiffServ.
2. Select Configure Policy from the Step list.
3.
Select Show Rule from the Action list.
Figure 129: Showing the Rules for a Policy Map
A
TTACHING A
P
OLICY
M
AP TO A
P
ORT
Use the Traffic > DiffServ (Configure Interface) page to bind a policy map
to an ingress port.
CLI R
EFERENCES
"Quality of Service Commands" on page 943
C
OMMAND
U
SAGE
First define a class map, define a policy map, and bind the service
policy to the required interface.
Only one policy map can be bound to an interface.
The switch does not allow a policy map to be bound to an interface for
egress traffic.
P
ARAMETERS
These parameters are displayed:
Port – Specifies a port.
Ingress – Applies the selected rule to ingress traffic.