Digisol DG-FS4526E, Management Manual

Page: 630 / 1162

C
HAPTER
21 | System Management Commands
Switch Clustering
– 630 –
cluster member
This command configures a Candidate switch as a cluster Member. Use the
no form to remove a Member switch from the cluster.
S
YNTAX
cluster member mac-address mac-address id member-id
no cluster member id member-id
mac-address - The MAC address of the Candidate switch.
member-id - The ID number to assign to the Member switch.
(Range: 1-36)
D
EFAULT
S
ETTING
No Members
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
The maximum number of cluster Members is 36.
The maximum number of cluster Candidates is 100.
E
XAMPLE
Console(config)#cluster member mac-address 00-12-34-56-78-9a id 5
Console(config)#
rcommand
This command provides access to a cluster Member CLI for configuration.
S
YNTAX
rcommand id member-id
member-id - The ID number of the Member switch.
(Range: 1-36)
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
This command only operates through a Telnet connection to the
Commander switch. Managing cluster Members using the local console
CLI on the Commander is not supported.
There is no need to enter the username and password for access to the
Member switch CLI.