manualshive.com logo in svg

Digisol DG-FS4526E, Management Manual

Share
Download
Digisol DG-FS4526E Management Manual Download Page 141

C

HAPTER

 5

  |  Interface Configuration

Port Configuration

–  141  –

P

ARAMETERS

These parameters are displayed:

Table 7: Port Statistics  

Parameter

Description

Interface Statistics

Received Octets

The total number of octets received on the interface, including 

framing characters.

Transmitted Octets

The total number of octets transmitted out of the interface, 

including framing characters.

Received Errors

The number of inbound packets that contained errors preventing 

them from being deliverable to a higher-layer protocol.

Transmitted Errors

The number of outbound packets that could not be transmitted 

because of errors.

Received Unicast Packets The number of subnetwork-unicast packets delivered to a higher-

layer protocol.

Transmitted Unicast 

Packets

The total number of packets that higher-level protocols requested 

be transmitted to a subnetwork-unicast address, including those 

that were discarded or not sent.

Received Discarded 

Packets

The number of inbound packets which were chosen to be 

discarded even though no errors had been detected to prevent 

them being deliverable to a higher-layer protocol. One possible 

reason for discarding such a packet could be to free up buffer 

space.

Transmitted Discarded 

Packets

The number of outbound packets which were chosen to be 

discarded even though no errors had been detected to prevent 

their being transmitted. One possible reason for discarding such a 

packet could be to free up buffer space.

Received Multicast 

Packets

The number of packets, delivered by this sub-layer to a higher 

(sub-)layer, which were addressed to a multicast address at this 

sub-layer. 

Transmitted Multicast 

Packets

The total number of packets that higher-level protocols requested 

be transmitted, and which were addressed to a multicast address 

at this sub-layer, including those that were discarded or not sent. 

Received Broadcast 

Packets

The number of packets, delivered by this sub-layer to a higher 

(sub-)layer, which were addressed to a broadcast address at this 

sub-layer. 

Transmitted Broadcast 

Packets

The total number of packets that higher-level protocols requested 

be transmitted, and which were addressed to a broadcast address 

at this sub-layer, including those that were discarded or not sent. 

Received Unknown 

Packets

The number of packets received via the interface which were 

discarded because of an unknown or unsupported protocol. 

Etherlike Statistics

Single Collision Frames

The number of successfully transmitted frames for which 

transmission is inhibited by exactly one collision.

Multiple Collision Frames

A count of successfully transmitted frames for which transmission 

is inhibited by more than one collision.

Late Collisions

The number of times that a collision is detected later than 512 bit-

times into the transmission of a packet.

Excessive Collisions

A count of frames for which transmission on a particular interface 

fails due to excessive collisions. This counter does not increment 

when the interface is operating in full-duplex mode.

Deferred Transmissions

A count of frames for which the first transmission attempt on a 

particular interface is delayed because the medium was busy.

Summary of Contents for DG-FS4526E











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands