Digisol DG-FS4526E, Management Manual

Page: 730 / 1162

C
HAPTER
25 | General Security Measures
Network Access (MAC Address Authentication)
– 730 –
E
XAMPLE
Console#show network-access interface ethernet 1/1
Global secure port information
Reauthentication Time : 1800
--------------------------------------------------
--------------------------------------------------
Port : 1/1
MAC Authentication : Disabled
MAC Authentication Intrusion action : Block traffic
MAC Authentication Maximum MAC Counts : 1024
Maximum MAC Counts : 2048
Dynamic VLAN Assignment : Enabled
Guest VLAN : Disabled
Console#
show network-
access mac-
address-table
Use this command to display secure MAC address table entries.
S
YNTAX
show network-access mac-address-table [ static | dynamic ]
[ address mac-address [ mask ]] [ interface interface ]
[ sort { address | interface }]
static - Specifies static address entries.
dynamic - Specifies dynamic address entries.
mac-address - Specifies a MAC address entry.
(Format: xx-xx-xx-xx-xx-xx)
mask - Specifies a MAC address bit mask for filtering displayed
addresses.
interface - Specifies a port interface.
ethernet unit / port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-26)
sort - Sorts displayed entries by either MAC address or interface.
D
EFAULT
S
ETTING
Displays all filters.
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
When using a bit mask to filter displayed MAC addresses, a 1 means “care”
and a 0 means “don't care”. For example, a MAC of 00-00-01-02-03-04 and
mask FF-FF-FF-00-00-00 would result in all MACs in the range 00-00-01-
00-00-00 to 00-00-01-FF-FF-FF to be displayed. All other MACs would be
filtered out.