Digisol DG-FS4526E, Management Manual

Page: 670 / 1162

C
HAPTER
24 | Authentication Commands
Client
– 670 –
Retransmit Times : 2
Request Timeout : 5
Server 1:
Server IP Address : 192.168.1.1
Authentication Port Number : 1812
Accounting Port Number : 1813
Retransmit Times : 2
Request Timeout : 5
RADIUS Server Group:
Group Name Member Index
------------------------- -------------
radius 1
Console#
C
LIENT
Terminal Access Controller Access Control System () is a logon
authentication protocol that uses software running on a central server to
control access to TACACS-aware devices on the network. An authentication
server contains a database of multiple user name/password pairs with
associated privilege levels for each user or group that require management
access to a switch.
tacacs-server host
This command specifies the server and other optional
parameters. Use the no form to remove the server, or to restore the
default values.
S
YNTAX
tacacs-server index host host-ip-address [ key key ]
[ port port-number ] [ retransmit retransmit ] [ timeout timeout ]
no tacacs-server index
index - The index for this server. (Range: 1)
host-ip-address - IP address of a server.
key - Encryption key used to authenticate logon access for the
client. Do not use blank spaces in the string. (Maximum length: 48
characters)
Table 71: Client Commands
Command Function Mode
tacacs-server host Specifies the server and optional
parameters
GC
tacacs-server key Sets the encryption key GC
tacacs-server port Specifies the server network port GC
show tacacs-server Shows the current settings GC